| Paper |
Title |
Page |
| PO09 |
Progress on the RFQ Beam Cooler Design for SPES Project |
68 |
| |
- M.M. Maggiore, F. Chiurlotto, M. Comunian, A. Dainelli, M. De Lazzari, A. Galatà, A. Minarello, A.M. Porcellato, S. Stark
INFN/LNL, Legnaro (PD), Italy
|
|
| |
The SPES project is the new Radioactive Ion Beam facility under construction at Laboratori Nazionali of Legnaro, Italy. In this framework in order to improve the beam quality in terms of transversa emittance and energy spread, a study of a new RFQ beam cooler device is in progress. The electromagnetic design of the RFQ section and the electrostatic layout of the injection and extraction regions have been done. The study about the beam dynamic is going on by means of dedicated codes which allow to take into account the interaction of the ions with the buffer gas needed to cool the beams. The preliminary design of the device is carrying on at LNL since 2011 and the feasibility study is funded by V committee of INFN in the framework of REGATA experiment. Both beam dynamics study and the electromagnetic design are presented in this work.
|
|
| |
| TUA02 |
A Cost-Effective Energy Upgrade of the ALPI Linac at INFN-Legnaro |
106 |
| |
- G. Bisoffi, M. Comunian, A. Facco, A. Galatà, P. Modanese, R. Pengo, A. Pisent, A.M. Porcellato, S. Stark
INFN/LNL, Legnaro (PD), Italy
- B.B. Chalykh
ITEP, Moscow, Russia
|
|
| |
The ALPI SC linac at INFN-LNL is being constantly upgraded in terms of maximum beam energy (Ef) and current, made available for experiments. Presently, a liquid-N cooling scheme is being applied to the RF power couplers of the 16 full Nb resonators, to keep them locked at 5 MV/m, vs. present 3 MV/m. A further upgrade of the 44 “medium beta section” cavities, changing the cavity Cu substrates, was prototyped and is reported at this conference: however it is not fully funded yet and is extremely time-consuming. A cost-effective Ef upgrade is proposed here: to move 2 SC buncher cryostats, which house a single working SC QWR but were designed for 4, at the end of ALPI, equipping them with 4 Nb/Cu QWRs each (new bunchers would either be NC QWRs or a single SC cavity cryostat). The contribution of these cryostats to Ef would be extremely effective: e.g. a Ef~10 MeV/A (Ibeam≥ 1 pnA) Pb beam, a very attractive tool for the Nuclear Physics community, is achievable. A being performed upgrade of ALPI cryoplant, expected to increase the refrigeration capability by ~25%, makes this change possible today. Details of this solutions, as well as its limits, will be presented and discussed
|
|
|
Slides TUA02 [3.722 MB]
|
|
| |