| Paper |
Title |
Page |
| MOC01 |
Progress and Plans for High Mass Beam Delivery at TRIUMF |
33 |
| |
- M. Marchetto
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
|
|
| |
ISAC is a TRIUMF facility for production and post-acceleration of radioactive ion beams (RIB). The RIBs are produced in two targets using a 500 MeV proton of up to 0.1 mA. The produced radioactive species are then ionized, extracted up to 60 kV, mass selected and transported to either the low energy experimental area or to the post-accelerators. The first stage of acceleration is accomplished via an RFQ followed by a DTL; at this medium stage the energy ranges between 0.15 MeV/u and 1.8 MeV/u for 3≤A/q≤7. The second stage of the acceleration uses a 40 MV superconducting linac for a final energy up to 18 MeV/u. High mass (>30) beams need multiple charges to be accepted by the RFQ. The single charge ions out of the target source are charge bred using an ECR charge state booster. The breeding process generates a significant amount of background contamination that masks the desired ions inside a mixed ”cocktail” beam. Such a cocktail needs to be cleaned of contaminants. An unprecedented effort is going on at TRIUMF trying to clean the high mass cocktail beams using the accelerator chain as filter. The progress and future plans of the project will be presented in this paper.
|
|
|
Slides MOC01 [3.144 MB]
|
|
| |