Author: Kondrashev, S.A.
Paper Title Page
TUC03 Laser Ablation of Solids into an Electron Cyclotron Resonance Ion Sources for Accelerator Mass Spectroscopy 149
 
  • T. Palchan, F.G. Kondev, S.A. Kondrashev, C. Nair, R.C. Pardo, R.H. Scott, R.C. Vondrasek
    ANL, Argonne, USA
  • W. Bauder, P. Collon
    University of Notre Dame, Indiana, USA
  • J.F. Berg, T. Maddock, G. Palmotti, G. Youinou
    INL, Idaho Falls, Idaho, USA
  • G. Imel
    ISU, Pocatello, Idaho, USA
  • M. Paul
    The Hebrew University of Jerusalem, The Racah Institute of Physics, Jerusalem, Israel
  • M. Salvatores
    CEA Cadarache, Saint Paul Lez Durance, France
 
  Funding: This work is supported by the U.S. Department of Energy, Office of Nuclear Physics, under contract No. DE-AC02-06CH11357.
A project using accelerator mass spectrometry (AMS) is underway at the ATLAS facility to measure the atom densities of transmutation products present in samples irradiated in the Advanced Test Reactor at INL. These atom densities will be used to infer effective actinide neutron capture cross-sections ranging from Thorium to Califorium isotopes in different neutron spectra relevant to advanced fuel cycles. This project will require the measurement of many samples with high precision and accuracy. The AMS technique at ATLAS is based on production of highly-charged positive ions in an ECRIS followed by injection into a linear accelerator. We use a picosecond laser to ablate the actinide material into the ion source. We expect that the laser ablation technique will have higher efficiency and lower chamber contamination than sputtering or oven evaporation thus reducing ‘cross talk’ between samples. In addition a multi-sample holder/changer is part of the project to allow for a quick change between multiple samples. The results of off-line ablation tests and first results of a beam generated by the laser coupled to the ECR will be discussed as well as the overall project schedule.
 
slides icon Slides TUC03 [1.610 MB]  
 
WEB02 Commissioning of CARIBU EBIS Charge Breeder Sub-systems 165
 
  • S.A. Kondrashev, C. Dickerson, A. Levand, P.N. Ostroumov, R.C. Vondrasek
    ANL, Argonne, USA
  • M.A. Batazova, G.I. Kuznetsov
    BINP SB RAS, Novosibirsk, Russia
  • A.I. Pikin
    BNL, Upton, Long Island, New York, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under contract number DE-AC02-06CH11357.
A high-efficiency charge breeder based on an Electron Beam Ion Source (EBIS) to increase the intensity and improve the purity of accelerated neutron-rich radioactive ion beams is being developed by the ANL Physics Division. The design of the EBIS charge breeder is complete and manufacturing of the components and sub-systems is in progress. A 6-Tesla superconducting solenoid and a high-perveance electron gun were recently delivered and successfully commissioned. The current status of the ANL EBIS development and commissioning results of different EBIS sub-systems will be presented.
 
slides icon Slides WEB02 [1.219 MB]  
 
WEB04 Electron and Ion Beam Dynamics in the CARIBU EBIS Charge Breeder 172
 
  • C. Dickerson, S.A. Kondrashev, B. Mustapha, P.N. Ostroumov
    ANL, Argonne, USA
  • A.I. Pikin
    BNL, Upton, Long Island, New York, USA
 
  Funding: This work is supported by the U.S. Department of Energy, Office of Nuclear Physics, under contract number DE-AC02-06CH11357.
An Electron Beam Ion Source (EBIS) is being built to charge breed ion beams from the Californium Rare Isotope Breeder Upgrade (CARIBU) for acceleration in the Argonne Tandem Linear Accelerator System (ATLAS) at Argonne National Laboratory (ANL). The overall efficiency of the source and charge breeder system is important since CARIBU will produce many low intensity radioactive ion species. Simulations of the electron and ion beam dynamics have been used to determine the system’s expected performance. The details of these simulations and results will be presented.
 
slides icon Slides WEB04 [1.362 MB]