GAMMASPHERE boot parameters


VME CRATE 1
general: All the VME modules are using srv1 as their boot host. However, the disk they really boot from is on gsfs. Here is a breakdown:

/vxboot -> /home/gam/prod/

and you will find that /home/gam
is mounted from:

srv1:/export/home/gam 1668079 1362228  139044    91%    /tmp_mnt/home/gam

on srv1 you will find this disk mouted as:

/dev/sd2e            1668079 1362228  139044    91%    /export/home/gam

In " /vxboot/daq/boot/eff/...." boot is a link that points to the
current version of the install directory and it can be repointed to
an older version in case of trouble.

executive summary: The VME provessors get their stuff from the

     /export/home/gam/prod/daq/test/....

dir on srv1. [NOW served from gsfs.onenet:/vol/vol0/srv1/gam]



gate1 boot parameters

boot device          : ei 
processor number     : 0 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167gate/vxWorks 
inet on ethernet (e) : 192.168.203.150:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/gate/startup.gate1 
other (o)            : 

EFF1 boot parameters

boot device          : ei 
processor number     : 1 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.152:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas03 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff1 
other (o)            : 


EFF2 boot parameters

boot device          : ei 
processor number     : 2 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.153:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas04 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff2 
other (o)            : 


EFF3 boot parameters

boot device          : ei 
processor number     : 3 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.154:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas05 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff3 
other (o)            : 

TAPER1 boot parameters

boot device          : ei 
processor number     : 4 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167taper/vxWorks 
inet on ethernet (e) : 192.168.203.155:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas06 
startup script (s)   : /vxboot/daq/boot/taper/startup.taper1 
other (o)            : 

TAPER2 boot parameters

boot device          : ei 
processor number     : 5 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167taper/vxWorks 
inet on ethernet (e) : 192.168.203.156:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas07 
startup script (s)   : /vxboot/daq/boot/taper/startup.taper2 
other (o)            : 

VME CRATE 2


gate2 boot parameters

boot device          : ei 
processor number     : 0 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167gate/vxWorks 
inet on ethernet (e) : 192.168.203.160:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/gate/startup.gate2 
other (o)            : 

EFF4 boot parameters

boot device          : ei 
processor number     : 1 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.162:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas13 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff4 
other (o)            : 

EFF5 boot parameters

boot device          : ei 
processor number     : 2 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.163:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas14 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff5 
other (o)            : 

EFF6 boot parameters

boot device          : ei 
processor number     : 3 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv166eff/vxWorks 
inet on ethernet (e) : 192.168.203.164:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas15 
startup script (s)   : /vxboot/daq/boot/eff/startup.eff6 
other (o)            : 

TAPER3 boot parameters

boot device          : ei 
processor number     : 4 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167taper/vxWorks 
inet on ethernet (e) : 192.168.203.165:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas16 
startup script (s)   : /vxboot/daq/boot/taper/startup.taper3 
other (o)            : 

TAPER4 boot parameters

boot device          : ei 
processor number     : 5 
host name            : srv1 
file name            : /vxboot/kernels/boot/mv167taper/vxWorks 
inet on ethernet (e) : 192.168.203.166:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x8 
target name (tn)     : gamdas17 
startup script (s)   : /vxboot/daq/boot/taper/startup.taper4 
other (o)            : 

Sender boot parameters

boot device          : ei 
processor number     : 9 
host name            : srv1 
file name            : /vxboot/kernels/vmetest/mv166sender/vxWorks 
inet on ethernet (e) : 192.168.203.167:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.113 
gateway inet (g)     : 192.168.203.254 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : gamdas18 
startup script (s)   : /vxboot/daq/boot/sender/startup.cmd 
other (o)            : 

vxi1 boot parameters @ ANL

located in Phill's lab.
Sits under a NAT (192.168.0.n).
The old vxitest sun is 192.168.0.5.
The proper parameters for the VXI processor are:
boot device          : ln 
processor number     : 0 
host name            : vxitest 
file name            : /usr/vxi_boot/kernels/R0.9/niCpu030-8/vxWorks 
inet on ethernet (e) : 192.168.0.7:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.0.5 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : vxi1 
startup script (s)   : /usr/vxi_boot/daq/boot/resm/startup.b29 
other (o)            : 


LN CRATE

The lnfill processor loads it stuff from lncon exclusively.


/vxboot -> /export/home/lncon/prod/

/dev/sd1c             189858   87958   82915    51%    /export/home/lncon



lnfill boot parameters

boot device          : ei
processor number     : 0 
host name            : lncon
file name            : /vxboot/lnfill/boot/vxWorks
inet on ethernet (e) : 192.168.203.121:ffffff00
host inet (h)        : 192.168.203.111
user (u)             : vxprod
flags (f)            : 0x0 
target name (tn)     : lnfill
startup script (s)   : /vxboot/lnfill/boot/startup.cmd
boot example
VXI CRATES

The VXI processors all use the shack computer as their boot host (146.139.56.12) and load from the directory "/vxboot/daq/boot/resm...". This directory is local on shack. Here is a breakdown:


on shack:

/vxboot -> /export/home/gam6/prod/

Notice that it points to the /export/home... dir so that it doesn't go
through the automount links. On other machines this dir is seen as
"/home/gam6/prod"

in this directory we find

      daq/boot/resm
      kernels/boot/niCpu030-t



master boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.176:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.mrc 
other (o)            : 

vxi1 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.170:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc1 
other (o)            : 

vxi2 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.171:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc2 
other (o)            : 

vxi3 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.172:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc3 
other (o)            : 

vxi4 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.173:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc4 
other (o)            : 

vxi5 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.174:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc5 
other (o)            : 

vxi6 boot parameters

boot device          : ln 
processor number     : 0 
host name            : shack 
file name            : /vxboot/kernels/boot/niCpu030-t/vxWorks 
inet on ethernet (e) : 192.168.203.175:ffffff00 
inet on backplane (b): 
host inet (h)        : 192.168.203.112 
gateway inet (g)     : 
user (u)             : vxprod 
ftp password (pw) (blank = use rsh): 
flags (f)            : 0x0 
target name (tn)     : 
startup script (s)   : /vxboot/daq/boot/resm/startup.lrc6 
other (o)            :