Author: Alcorta, M.
Paper Title Page
MOB04 Argonne In-flight Radioactive Ion Separator 24
  • S.L. Manikonda, M. Alcorta, B. Back, J.A. Nolen, R.C. Pardo, E. Rehm, G. Savard, D. Seweryniak
    ANL, Argonne, USA
  • B. Erdelyi
    Northern Illinois University, DeKalb, Illinois, USA
  Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357
The Argonne In-flight Radioactive Ion Separator (AIRIS) is a new large recoil separator that is being designed as a part of proposed future upgrade of the ATLAS facility to provide at least 10 times more collection efficiency than the existing system. In combination with other proposed upgrades it will provide a 2 orders of magnitude gain in the intensity for the in-flight produced secondary beams compared to the existing facility. The resulting unprecedented intensities for the recoil beam open new opportunities in several physics domains, e.g. gamma ray spectroscopy after secondary reactions, reactions for rp‐, νp‐, αp‐ processes and CNO cycle. The proposed design for the AIRIS device is based on four multipole magnets and four dipole magnets arranged in a so called broadband spectrometer configuration. This arrangement will be followed by two RF cavities to provide further selection based on velocity differences between the primary beam tail and the recoiling RIB. The advantages of such a design and key parameters will be discussed. We will demonstrate the performance of the device for few representative reaction cases that can be studied using AIRIS.
slides icon Slides MOB04 [1.626 MB]